UL 48 電子標牌介紹 ( Electric sign )

UL 48主要針對電子標牌(Electric Signs)的所製定的標準,美國需符合National Electric Code NFPA70 和 UL 48的標準,而加拿大則為Canadian Electrical Code (CEC)和CSA 22.2 No. 207。
ANSI/UL48標準由第15版組成包含December 7, 2018修訂版。

UL 48 在推出第15個版本後,涵蓋所有的電子標牌包括所有通過電性操作和/或電氣照明的標牌(不考慮電壓),包括但不限於以下照明方法:Incandescent白熾燈,Fluorescent熒光燈,High intensity discharge高強度放電燈(HID),包括氖管的放電管,照明燈 Light-emitting diode發光二極管(LED),Skeleton neon tubing骨架霓虹燈管,Cold cathode冷陰極燈和Electroluminescence電子發光。 除非另有說明,否則術語“標牌”包括sign標牌,outline lighting輪廓照明,art forms藝術形式和skeleton neon tubing骨架霓虹燈管

這些要求涵蓋的電子標牌還包括但不限於遮陽篷標牌,拖車標牌,電動或機械動畫標牌,光電系統和其他獨立電源提供的標牌,變化信息的標牌,包括滾動,flipper,三視圖,液晶顯示器(LCD)和發光二極管(LED)類型以及其他不一定要點亮的電子標牌。

如下為不符合此標準的形式:
  • Illuminated clocks operating at 600V or less (低於600V操作電壓的照明鐘)
  • Exit signs (出口標牌)
  • Trailer of a trailer-mounted sign (拖車安裝標牌)
  • Luminaires mounted to function as outline lighting (輪廓照明燈)
  • Luminaires mounted within an awning sign (用於罩棚下之標牌)
  • Signs that do not use electricity (未使用電氣操作的標牌)
  • Luminaires intended for billboard illumination (廣告看板燈)
  • Fiber optics or fiber optic illuminators (光纖或光纖照明器)
  • Signs for use in hazardous locations (使用在危險地區的標牌)

 

性能安全試驗如下幾項:
  • Temperature
  • Dielectric
  • Strain relief
  • Stability
  • Mounting
  • Gasket aging
  • Gasket adhesion
  • Exclusion of water
  • Bond impedance
  • Accessibility barrier dielectric
  • Glass impact test
  • Lamp containment barrier melt-through test
  • Polymeric ground/bond strength test
  • Straight accessibility probe test
  • Mold stress relief distortion test
  • Torque, bending moment and conduit pullout tests
  • Conduit knockout and twistout test
  • Leakage current
  • Self-threading screw torque test